Shenzhen Sacon Telecom Co., Ltd
The professional manuafacturer of mobile signal jammer, cell phone signal jammer, uv drone jammer, mobile phone signal booster and wireless detector over 9 years in China.
Add to Cart
20dBm DCS1800 WCDMA2100 Mobile Phone Signal Booster Dual Band System
Description:
This DCS and 3G dual band booster can automatically control the gain and digital display current Gain, also can manual adjust the Gain, Also can show output power.
DCS & 3G Pico-Repeater is intended to strengthen the signal of 1800MHz & 2100mhz mobile phone in the buildings. Ideal for use in areas where the1800MHz & 2100mhz signal is weak to cause Call dropout or Cant connection. The device improves the voice calls and data VOICE GPRS and EDGE (depends of the signal operator).
Features:
1. High system gains.
2. Full duplex and double-end design, external power supply, and convenient installation.
3. ALC technology with auto-steady function adopted.
4. Provide power indication and uplink and downlink indications.
5. With the amplified linear power, the inter-modulation and spuriousness are suppressed effectively.
6. The reliability conforms to GB6993-86 standards.
7. The electromagnetic compatibility conforms to ETS300 609-4 standards.
Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Specifications:
| Frequency Range | Uplink | Downlink | ||
| DCS1800+WCDMA | 1710 -1785/1920-1980MHz | 1805-1880/2110- 2170MHz | ||
| Max. Gain | 65dB | 70dB | ||
| Max. Output Power | 15dBm | 20dBm | ||
| Band width | Wide Band | |||
| Manual Gain Control | 31dB / 1dB Step | |||
| Automatic Gain Control | >20dB | |||
| Ripple in-band | ≤ 6dB | |||
| Return loss | ≤ -10dB | |||
| Noise Figure | ≤ 6dB | |||
| Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | ||
| 1~12.75GHz | ≤ -30dBm | |||
| WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||
| Modulation Accuracy | ≤ 12.5% | |||
| Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | |||
| Time Delay | ≤ 1.5 μs | |||
| Frequency stability | ≤ 0.01ppm | |||
| MTBF | > 50000 hours | |||
| Power Supply | AC100-240V,DC9V/5A | |||
| Power LED | Power indicator | |||
| Impedance | 50 ohm | |||
| Alarm LED | Red | Autoexcitation or High Power | ||
| Green | Standard | |||
| Mechanical Specification | ||||
| RF Connector | N-Female | |||
| Switch | Power SwitchManual Gain Control Switch | |||
| Cooling | Heatsink Convection cooling | |||
| Humidity | < 90% | |||
| Operating Temperature | -10°C~55°C | |||
| Environment Conditions | IP40 | |||
| Installation Type | Wall Installation | |||
| Size | 268mm*58mm*350mm | |||
| Weight | 5.0Kg | |||
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Standard Package:
AC90-264V, DC5V/5A power supply adapter 1PCS
AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
Installation kit 1PCS
User manual 1PCS